45-21S-KK2C-B2832B6B9B12Z3-2T_V1.1

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T Features

․P-LCC-3 package. ․High flux output.

․High current capability. ․White package. ․Optical indicator.

․Colorless clear window.

․Ideal for backlight and light pipe application. ․Inter reflector.

․Wide viewing angle.

․Suitable for automatic placement equipment. ․Suitable for vapor-phase reflow.

․Available on tape and reel (8mm Tape). ․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 45-21S series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector.

․This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.

Applications

․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use.

Device Selection Guide

Chip Material

Emitted Color

Resin Color

InGaN Warm White Water Clear

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 1 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Package Dimensions

Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 2 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Absolute Maximum Ratings (TA=25℃)

Reverse Voltage Forward Current

Peak Forward Current (Duty 1/10 @1KHz)

Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature

Parameter Symbol Rating Unit VR 5 V IF 30 mA IFP 100 mA Pd ESD Topr Tstg Tsol

110 1000 -40 ~ +85 -40 ~ +90

mW V ℃ ℃

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Electronic Optical Characteristics (TA=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Viewing Angle

Forward Voltage

Φ 2θ1/2

8 ----- 10 lm IF=30mA

----- 120 ----- deg IF=30mA

VF 2.7 ----- 3.4 V IF=30mA ----

80

----

----

---- uA

IF=30mA VR=5V

Color Rendering Index

Reverse Current

IR ----- ----- 50

Note:

1. Tolerance of Luminous Flux: ±11% 2.Tolerance of Forward Voltage: ±0.05V 3.Tolerance of Color Rendering Index : ± 2

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 3 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Bin Range of Luminous Flux

Bin Min. Max. Unit Condition B6 8.0 8.5 B7 8.5 9.0 lm IF=30mA

B8 9.0 9.5 B9 9.5 10.0

Bin Range of Forward Voltage

Condition

Groups Bin Min. Max. Unit

34 2.7 2.8 35 2.8 2.9 36 2.9 3.0 B12

37 3.0 3.1 V IF=30mA 38 3.1 3.2 39 3.2 3.3 40 3.3 3.4 Notes:

1. Tolerance of Luminous Flux: ±11% 2.Tolerance of Forward Voltage : ±0.05V

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 4 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Bin Range of Chromaticity Coordinate IF=30mA

CCT Bin Code CIE_x

0.4312

P5

3250K ~3050K

P6

0.4456 0.4376 0.4240 0.4240 0.4376 0.4294 0.4165

CIE_y 0.4234 0.4287 0.4116 0.4065 0.4065 0.4116 0.3943 0.30

3050K ~2850K

N6 N5

CCT Bin Code

CIE_x CIE_y 0.4456 0.4614 0.4525 0.4376 0.4376 0.4525 0.4436 0.4294

0.4287 0.4333 0.4162 0.4116 0.4116 0.4162 0.3991 0.3943

Notes: Tolerance of Chromaticity Coordinates：±0.01

The CIE 1931 Chromaticity Diagram

0.430.420.41N5P5yN60.400.390.420.430.440.450.46P6xEverlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 5 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Typical Electro-Optical Characteristics Curves

Spectrum Distribution

Relative luminous intensity (%)100755025

Ta=25°C

Forward Current vs.Forward Voltage

Ta=25°C

0400

500600700800

Forward Voltage V (V)F

Luminous Intensity vs.Forward CurrentTa=25°CWavelength λ (nm) Luminous Intensity vs.

1000

Ambient Temperature

10000Relative luminous intensity(%)1000Relative luminous intensity (%)100

10

Forward Current I (mA)F10010

020406080100

1101

-60-40-20

Ambient Temperature Ta (°C)

10Forward Current I (mA) F

Forward Current Derating Curve

Radiation Diagram

Ta=25°C

0°I (mA)F10°20°30°Forward Current1.00.90.80.7

0.50.3

Ambient Temperature Ta (°C)

40°50°60°70°80°90°0.10.20.40.6

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 6 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Label Explanation

CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank

Reference : XXXXXXXXPbEVERLIGHTRoHSCPN :PN : XXXXXXXXXXXXXXXXXXXXXXXXXXQTY : XXXCAT : XXXHUE : XXXREF : XXXLOT NO : XXXXXXXXXX

Reel Dimensions

MADE IN TAIWAN

Note: The tolerances unless mentioned is : ±0.1mm,Unit = mm

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 7 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Carrier Tape Dimensions; Loaded Quantity 2000 pcs Per Reel

Progressive direction1.5+1.0 Note: 1.The tolerances unless mentioned is : ±0.1mm,Unit = mm 2.Minimum packing amount is 250/500/1000/2000 pcs per reel Moisture Resistant Packaging LabelAluminum moisture-proof bagDesiccantLabel+0.3-0.0 Everlight Electronics Co., Ltd. Device No. :DSE-000 http://www.everlight.com Prepared date:26-Aug.-2011 Rev.1.1 Page: 8 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%

No. Items Test

Test Condition Hours/Cycles

6 Min. 300 Cycles

Sample Size 22 PCS 22 PCS.

Ac/Re0/1 0/1

Temp. : 260℃±5℃

1 Reflow Soldering Max. 10 sec. H : +100℃ 15min 2 Temperature Cycle ∫ 5 min

L : -40℃ 15min H : +100℃ 5min

3 Thermal Shock ∫ 10 sec

L : -10℃ 5min 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High

Humidity

300 Cycles 22 PCS. 0/1

Temp. : 100℃ 1000 Hrs. 22 PCS. Temp. : -40℃ 1000 Hrs. 22 PCS. IF = 20 mA / 25℃

1000 Hrs.

22 PCS.

0/1 0/1 0/1 0/1

85℃/85%RH 1000 Hrs. 22 PCS.

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 9 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 168hrs under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

Above255°C 30sec.Max.260°C Max.10sec. Max.6°C/sec.Max.3°C/sec.Max.Above 217°C 60~150sec.Pre-heating150~200°C60~120sec.

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 10 of 11 Prepared by:Irene Lin

Technical Data Sheet -Preliminary Top View LEDs

45-21S/KK2C-B2832B6B9B12Z3/2T 4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-61, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-000

http://www.everlight.com Prepared date:26-Aug.-2011

Rev.1.1 Page: 11 of 11 Prepared by:Irene Lin