Epec 2038 Mini Control UnitEpec 2038 Mini Control Unit is the smallest control unit with 20 I/O pins for embedded control systems. The control unit is used independently in smaller machines or with other control units in larger systems. With the help of the 2038 Mini Control Unit it is possible to even further deepen the distribution of intelligence around the machine by locating the control unit next to connectable sensors, actuators, and other devices spread around the machine.There are two variations of this control unit. One variation of this control unit has two CAN bus interfaces. The other variation has CAN bus and RS232 serial interfaces.Product order code for CAN+RS232 version E30B2038-10 Product order code for CAN+CAN version E30B2038-20sae j1939isobus100gmini control unit 2038processorC167 40MHzIP67application sizesize256 kbyteprogramming0,5 kg9 ... 30 VDCovervoltage protection34 VDCPLCopenprotection class147 x 63 x 53 mmweightnominal operating voltageoperating temperature24 VDC-40 ... +70°Cfull operating rangeconnectors4 x DI/PI1 x AMP231 x AMP86 x AI/DI1 x DI/DO (sinking)4 x DI/DO/PWM/PI (sourcing) i/o interface, configuration examplei/o pins total20communications3 x AI/FB/DI2 x PWM/DO/DI (sourcing)2 x CAN or 1 x CAN + 1 x RS232AccessoriesShock cover for Epec control units All Epec control units are designed to endure very hard environmental conditions. When the control unit is mounted in such a place where it might get impacts from dropping items, someone stepping on it, or where it is exposed to possible water spray, a special shock cover is used to protect connectors and wire attachment points. The shock cover is mounted on the control unit by using two special M6 bolts. The cover does not increase on connectors. A special wire bracket is typically mounted under the control unit. Bolts are tightened to attach the bracket and the control unit to their places and the shock cover is mounted on top of them for extra protection.Product order code for shock cover E30C02192(Including wire mounting bracket and mounting bolts)8
