您好,欢迎来到华拓科技网。
搜索
您的当前位置:首页SF1143B-2;中文规格书,Datasheet资料

SF1143B-2;中文规格书,Datasheet资料

来源:华拓科技网
®SF1143B-2315.00 MHz

Pb•••••Designed for SDARS IF Receiver Low Insertion Loss

5.0 X 7.0 mm Surface-Mount CaseDifferential Input and Output

Complies with Directive 2002/95/EC (RoHS)

SAW Filter

Absolute Maximum Ratings

Rating

Maximum Incident Power in PassbandMax. DC voltage between any 2 terminalsStorage Temperature RangeMax Soldering Profile

Value+1030-40 to +105UnitsdBmVDC°C265°C for 10 s

SMP-03

Electrical Characteristics

SymfC

Insertion Loss at fcIL1dB PassbandBW1

Fast Amplitude Ripple over fc ±6.35 MHzGroup Delay Variation over fc ±6.35 MHzGDVRejection100 to fc-10.3 and fc+10.3 to fc+100 MHzOperating Temperature RangeTADifferential Input and Output ImpedanceCase StyleLid Symbolization (YY=year, WW=week, S=shift) See note 4Characteristic

Nominal Center FrequencyPassbandNotes1

±6.351, 21, 2, 316

40-4023TBDMin

Typ315.00015.1±7.05Max17.01.0200+105UnitsMHzdBMHzdBP-PnsP-PdB°C250 ohmsSMP-03 7 x 5 mm Nominal FootprintRFM SF1143B-2 YYWWSElectrical Connections

ConnectionPort 1 Hot

Port 1 Ground ReturnPort 2 Hot

Port 2 Ground ReturnCase Ground

Terminals

10156

All Others

Notes:

1.

Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer.2.Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.3.Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance

matching design. See Application Note No. 42 for details.4.\"LRIP\" or \"L\" after the part number indicates \"low rate initial production\" and \"ENG\" or \"E\" indicates \"engineering prototypes.\"5.The design, manufacturing process, and specifications of this filter are subject to change.6.Tape and Reel Standard ANSI / EIA 481.7.Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that

the filter must always be installed in one direction per the circuit design.8.US and international patents may apply.9.RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.10.©Copyright 1999, RF Monolithics Inc.

11.Electrostatic Sensitive Device. Observe precautions for handling.RF Monolithics, Inc.Phone: (972) 233-2903Fax: (972) 387-8148RFM EuropePhone: 44 1963 251383Fax: 44 1963 251510

©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.E-mail: info@rfm.comhttp://www.rfm.comSF1142B-2-030705

Page 1

http://oneic.com/

315.00 MHz SAW Filter

Tape and Reel Specifications

“B “

Nominal SizeInches

100 REF.\"B\" REF.Quantity Per Reel

5002000

millimeters

178330

713

See Detail \"A\"16.012.0013.20.22.0COMPONENT ORIENTATION and DIMENSIONS

Carrier Tape Dimensions

AoBoKoPitchW

5.5 mm7.5 mm2.0 mm8.0 mm16.0 mm

PIN #1

USER DIRECTION OF FEEDRF Monolithics, Inc.Phone: (972) 233-2903Fax: (972) 387-8148

RFM EuropePhone: 44 1963 251383Fax: 44 1963 251510

©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.E-mail: info@rfm.comhttp://www.rfm.comSF1142B-2-030705

Page 2

http://oneic.com/

315.00 MHz SAW Filter

10-Terminal Ceramic Surface-Mount Case

7 x 5 mm Nominal Footprint

Case Dimensions

Dimension

ABCDEHJKP

Min6.804.80

mmNom7.005.001.650.602.541.05.003.001.27

Max7.205.202.00

Min0.2680.1

InchesNom0.2760.1970.0650.0240.1000.0390.1970.1180.050

Max0.2830.2050.079

Electrical Connections

Connection

Port 1Port 2

Input or ReturnReturn or InputOutput or ReturnReturn or OutputGround

Single Ended OperationDifferential Operation

Terminals

10156All othersReturn is groundReturn is hot

CB110H10E1-2RFMSF1143BYYWWS234987DA98723P45665TOP VIEWBOTTOM VIEWRF Monolithics, Inc.Phone: (972) 233-2903Fax: (972) 387-8148RFM EuropePhone: 44 1963 251383Fax: 44 1963 251510

©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.E-mail: info@rfm.comhttp://www.rfm.comSF1142B-2-030705

Page 3

http://oneic.com/

分销商库存信息:

RFM

SF1143B-2

因篇幅问题不能全部显示,请点此查看更多更全内容

Copyright © 2019- huatuo6.cn 版权所有 赣ICP备2024042791号-9

违法及侵权请联系:TEL:199 18 7713 E-MAIL:2724546146@qq.com

本站由北京市万商天勤律师事务所王兴未律师提供法律服务